Kyocera KM-2530 - Page 100

CHAPTER 6 COPIER MANAGEMENT
6-26
•
Exposure steps
Selects how many exposure levels you want there to be in the
manual exposure mode.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Exposure steps” in the setting item list at the left-
hand side of the screen, and then touch the [Change #]
key.
The “Exposure steps” screen will appear.
Select adjust step for copy exposure, 1 step or 0.5 step.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
•
Original type
Specify the copy quality mode that you want be automatically
selected each time the copier is turned on.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Original image quality” in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The “Original type” screen will appear.
Select default mode of original image quality, “Text”,
“Photo” or “Text + Photo”.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications