Kyocera KM-2530

CHAPTER 5 FUNCTIONS
5-18
This mode can be used to have covers, either blank or with an
image copied onto the front cover, included on the copy sets so
that they can be bound in a booklet format.
IMPORTANT
(Inch specifications)
• The size of originals that can be used in this mode is limited to
11" ✕ 17" and 8 1/2" ✕ 11R", and the paper size is limited to 11"
✕ 17" and 8 1/2" ✕ 11".
(Metric specifications)
• The size of originals that can be used in this mode is limited to
A3, B4, A4R and B5R, and the paper size is limited to A3, B4,
A4 and B5R.
•
Copy onto the cover
If the original that will be copied onto the front cover is scanned in
first, the paper onto which it is copied will be in the front cover
position after the copies are finished and folded in the center.
•
Do not copy onto the cover
When the finished copies are folded in the center, both the front
and back covers will be blank.
9. Making a booklet (two-page [open-face] originals) [Booklet + cover copy mode]
Set the two-page (open-face) original.
Touch the [Function] key.
The Function screen will appear.
Touch the [Booklet] key.
The “Booklet” screen will appear.
1
Inch specifications
Metric specifications
3
Inch specifications
Metric specifications
B
A
2
B
A
3
1
5
4
6
6
1
2
3
5
4
2
3
1
5
4
6
1
2
3
5
4
A
B
6
B
A
B
A
2