9-1
1. Cleaning the copier
•
Cleaning the original cover
Lift open the original cover. Wipe the back side of the original
cover with a soft cloth dampened with alcohol or a mild deter-
gent.
*Never use thinner or other organic solvents for this purpose.
•
Cleaning the platen
Lift open the original cover.
Wipe the platen with a soft cloth damp-
ened with alcohol or a mild detergent.
*Never use thinner or other organic solvents for this purpose.
* If soiling, such as black lines appear on the copy while using
the optional Document Processor, the slit glass a is soiled.
Wipe the slit glass with a soft cloth dampened with alcohol or a
mild detergent.
•
Cleaning the separator
NOTE
• To keep the best copying quality, perform cleaning periodically
(approximately once a month) using the following procedure.
Open the front cover.
Remove the cleaning brush.
1
2
a
CHAPTER 9 CLEANING AND SPECIFICATIONS
CAUTION
For safety purposes, ALWAYS remove the power plug
from the outlet when performing cleaning operations.
To Next Page
Loading...
