Kyocera KM-2530

CHAPTER 6 COPIER MANAGEMENT
6-25
Touch the [Copy default] key in the “Default setting menu”
screen.
The “Enter the administrator number” screen will appear.
Enter the 4-digit management pin code “嘷嘷嘷嘷” with
the numeric keys. “2500” for Copiers with a copy speed
of 25 copies per minute, “3500” for Copiers with a copy
speed of 35 copies per minute or “4000” for Copiers with
a copy speed of 40 copies per minute is set at the ship-
ment.
The “Copy default” screen will appear.
NOTE
• The 4-digit management pin code can be changed. (See “Man-
agement code change” on page 6-21.)
Select the item and then perform the settings by follow-
ing “(3) Changing the default settings”.
(6) Changing the copy default settings
•
Exposure mode
Specify which copy exposure mode you want to be automatically
selected each time the copier is turned on, the auto exposure
mode or the manual exposure mode.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Exposure mode” in the setting item list at the
left-hand side of the screen, and then touch the [Change
#] key.
The “Exposure mode” screen will appear.
Select default mode of copy exposure, auto or manual.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
4
5
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications
3
Inch specifications
Metric specifications