Kyocera KM-2530

CHAPTER 5 FUNCTIONS
5-21
11. Rotate sort copy mode
Even when the orientation of original is different from that of pa-
per in the drawer, the image will be turned 90 degrees counter-
clockwise for copying. For this function, no setting is required.
IMPORTANT
(Inch specifications)
• The paper size available for rotate copy is limited to 11" ✕ 8 1/2"
and 5 1/2" ✕ 8 1/2".
(Metric specifications)
• The paper size available for rotate copy is limited to A4 and
A5R.
When the rotate copy function is not used, perform the following
procedure.
Touch the [Function] key and then the [▼Down] key.
The next Function screen will appear.
Touch the [Auto Rotation] key.
The “Auto Rotation” screen will appear.
Touch the [No rotate] key.
Inch specifications
Metric specifications
Inch specifications
Metric specifications
2
1
3