Kyocera KM-2530 - Page 103

CHAPTER 6 COPIER MANAGEMENT
6-29
•
Auto exposure adjustment
Adjust the overall exposure level for the auto exposure mode.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Auto exposure adjustment” in the setting item
list at the left-hand side of the screen, and then touch
the [Change #] key.
The “Auto exposure adjustment” screen will appear.
Touch the [Lighter] or [Darker] key to adjust default set-
ting of copy exposure.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
•
Default magnification
Specify which mode you want to be automatically selected
for enlargement/reduction (zoom) copying: the fixed-size zoom
mode or the standard zoom mode.
Display the “Copy default” screen. (See (5) Accessing
the copy default setting mode.)
Select “Default magnification” in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The “Default magnification” screen will appear.
Select default magnification mode, Manual or AMS.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Copy default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
2
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications