Kyocera KM-2530

CHAPTER 3 HOW TO LOAD PAPER
3-3
Insert the paper along the guides as far as it will go.
IMPORTANT
• When loading paper into the multi-bypass, make sure that the
copy side is facing upward. (The copy side is the side facing
upward when the package is opened.) If the leading edge of the
paper is curled, straighten it out before loading the paper in the
multi-bypass.
• Setting envelopes
When using the optional printer function, envelopes can be set in
the multi-bypass.
NOTE
• The types of envelopes that can be used are COM-10, Mon-
arch, DL and C5. Up to 20 envelopes can be loaded in the multi-
bypass at a time.
Open the multi-bypass.
Align the insert guides with the envelope size.
Open the flap of the envelope and set it with the copy
side facing up ward. With the flap facing the outside, in-
sert the envelope into the slot along the insert guides as
far as it will go.
NOTE
• Incorrectly loading envelopes can result in printing in the wrong
orientation or on the wrong side.
3
1
2
3