CHAPTER 6 COPIER MANAGEMENT
6-7
Touch the [Close] key.
“Amend the number of copy” screen will appear.
Touch the [Close] key.
The “Management code menu” screen will appear.
Touch the [On] key below “Copy”, and then touch the
[Close] key.
The selected management code is turned ON, and then
the display will return to the “Default setting menu”
screen.
•
Clearing copy counts
Clear all the copy counts for the various departments after a suit-
able period of time. Copy counts cannot be cleared individually.
Display the “Management code menu” screen. (See (2)
How to display the “Management code menu” screen.)
Touch the [Counter clear] key.
A message asking you to confirm the deletion of the copy
counts will appear.
To clear the codes, touch the [Yes] key. To cancel, touch
the [No] key.
The copy counts are cleared, and the control returns to
the “Management code menu” screen.
5
6
7
1
2
3
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications
4
To Next Page
Loading...
