Kyocera KM-2530 - Page 93

CHAPTER 6 COPIER MANAGEMENT
6-19
•
Select the main mode (optional)
Select the screen displayed when the power is turned ON.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Select the main mode” in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The “Select the main mode” screen will appear.
Select the screen displayed when the power is turned
ON.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
•
Key sound ON/OFF
Select whether you want the “beep” that sounds when you touch
the touch panel to be turned ON or OFF.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Key sound” in the setting item list at the left-hand
side of the screen, and then touch the [Change #] key.
The “Key sound ON/OFF” screen will appear.
Select panel key sound mode ON or OFF.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
2
1
2
4
5
Inch specifications
Metric specifications
Inch specifications
3
Metric specifications