Kyocera KM-3035

2FD/2FF/2FG-3.0
1-1-2
Tr ansfer system .............................Transfer roller (100 µA)
Separation system .........................Separation electrode (60 or 10 µA depending on the paper)
Fixing system .................................Heat roller
Heat source: halogen heaters (120 V specifications:main 600 W, sub 500 W/220-240
V specifications:main 640 W, sub 534 W)
Control temperature: 175°C/347°F (at normal ambient temperature, 50 cpm copier)
170°C/338°F (at normal ambient temperature, 40 cpm copier)
165°C/329°F (at normal ambient temperature, 30 cpm copier)
Abnormally high temperature protection device: 170°C/338°F thermostat
Fixing pressure: 107.8 N
Charge erasing system..................Exposure by cleaning lamp
Cleaning system.............................Cleaning blade and roller
Scanning system............................Flat bed scanning by CCD image sensor
Bit map memory.............................27 MB (standard)
Image storage memory..................37 MB (standard)
Resolution ......................................600 × 600 dpi
Light source....................................Inert gas lamp
Dimensions ....................................585 (W) × 646 (D) × 745 (H) mm
23" (W) × 25
2
/
5
" (D) × 29
1
/
3
" (H)
Weight ............................................Approx. 82 kg/165 lbs
Floor requirements.........................1512 (W) × 646 (D) mm
59
1
/
2
" (W) × 25
2
/
5
" (D)
Functions........................................Auto paper selection mode, Image quality selection, Auto magnification selection
mode, Zoom mode, Preset zoom mode, XY zoom mode, 2-sided copy modes, Page
separation/Split copy modes, Margin mode, Centering/Image shift mode, Memo
mode, Border erase modes, Combine/Merge Copy modes, Print page numbers
mode, Form overlay mode, Booklet/Stitching mode, Book to Booklet mode, Sort/
Finished mode, Auto rotation function, Cover mode, Transparency + backing sheet
mode, Invert mode, Mirror image mode, Proof mode, Repeat copy mode*, Batch
scanning mode, Eco print mode, Program function, Job build mode, Form
registration*, Shared data box*, Synergy print boxes*, Copy management mode,
Language selection function
*Requires the optional hard disk
Power source .................................120 V AC, 60 Hz, 12 A Max.
220 – 240 V AC, 50/60 Hz, 6.5 A Max.
Power consumption........................Max. 1450 W
Options...........................................DP, paper feeder, large paper deck, job separator, 3000-sheet finisher, 1000-sheet
finisher, booklet stitcher, built-in finisher, key counter, fax board, printer board,
network printer board, network scanner board, hard disk