Kyocera KM-3035

2FD/2FF/2FG-3.0
1-1-1
1-1-1 Specifications
Type ...............................................Desktop
Copying system .............................Indirect electrostatic system
Originals .........................................Sheets and books
Maximum size: A3/11" × 17"
Original feed system ......................Fixed
Copy paper ....................................Drawer: Plain paper (64 – 105 g/m
2
)
Bypass table: Plain paper (45 – 200 g/m
2
)
Special paper: Transparencies, tracing paper, colored paper, letterhead and
envelopes (when using the printer function only)
Note: Use the bypass table for special paper.
Copying sizes.................................Maximum: A3/11" × 17"
Minimum: A6R/5
1
/
2
" × 8
1
/
2
" (When the bypass table is used)
Magnification ratios ........................Manual mode: 25 – 400%, 1% increments
Auto copy mode: fixed ratios
Metric
1:1 ± 1.0%, 1:4.00/1:2.00/1:1.41/1:1.22/1:1.15/1:0.86/1:0.81/1:0.70/1:0.50/1:0.25
Inch
1:1 ± 1.0%, 1:4.00/1:2.00/1:1.29/1:1.21/1:0.78/1:0.64/1:0.50/1:0.25
Copy speed....................................At 100% magnification in copy mode:
30 cpm copier
A3/11" × 17": 20 copies/min.
B4/8
1
/
2
" × 14": 20 copies/min.
A4/11" × 8
1
/
2
": 30 copies/min.
A4R/8
1
/
2
" × 11": 22 copies/min.
B5: 30 copies/min.
B5R: 18 copies/min.
40 cpm copier
A3/11" × 17": 23 copies/min.
B4/8
1
/
2
" × 14": 23 copies/min.
A4/11" × 8
1
/
2
": 40 copies/min.
A4R/8
1
/
2
" × 11": 27 copies/min.
B5: 40 copies/min.
B5R: 22 copies/min.
50 cpm copier
A3/11" × 17": 26 copies/min.
B4/8
1
/
2
" × 14": 26 copies/min.
A4/11" × 8
1
/
2
": 50 copies/min.
A4R/8
1
/
2
" × 11": 31 copies/min.
B5: 50 copies/min.
B5R: 24 copies/min.
First copy time................................From 3.9 s (A4/11" × 8
1
/
2
") <30 cpm copier>
From 3.5 s (A4/11" × 8
1
/
2
") <40 cpm copier/50 cpm copier>
Warm-up time.................................25 s or less (room temperature 23°C/73.4°F, 50% RH)
In preheat/energy saver mode: 12 s or less (room temperature 23°C/73.4°F, 50%
RH) [priorty to power save]
Paper feed system .........................Automatic feed
Capacity:
Drawers: 500 sheets
Manual feed
Capacity:
Bypass: 200 sheets
Continuous copying .......................1 - 999 sheets
Photoconductor..............................a-Si (drum diameter 40 mm)
Charging system ............................Single positive corona charging (500 µA)
Exposure light source ....................Semiconductor laser
Exposure scanning system............ Polygon mirror
Developing system.........................Dry, reverse developing (single component system)
Developer: 1-component, magnetism toner
Developing bias: +1.72 kV AC
Developing shift bias: 160 V
Toner replenishing: automatic from a toner container