Kyocera KM-3035 - Page 343

2FD/2FF/2FG
2-4-13
Item Image Description
Data processingAdjusting magnification of
the scanner in the main
scanning direction
(scanning adjustment)
MAIN SCAN ADJ No adjustment for copying
using the DP.
1-6-27U065
Item No.
Mode
Original Page Remarks
Maintenance mode
Test chart
Adjust-
ing
order
!
Original scanning speedAdjusting magnification of
the scanner in the auxiliary
scanning direction
(scanning adjustment)
SUB SCAN ADJ
ADJUST DATA
U065: For copying an original
placed on the contact glass.
U070: For copying originals
from the DP.
1-6-28
1-4-25
U065
U070
Test chart
@
Original scan start timingAdjusting the leading edge
registration (scanning ad-
justment)
ADJUST DATA
LEAD EDGE ADJ
U066: For copying an original
placed on the contact glass.
U071: For copying originals
from the DP.
1-6-29
1-4-26
U066
U071
Test chart
$
Adjusting the center line
(scanning adjustment)
ADJUST DATA
1 sided
U067: For copying an original
placed on the contact glass.
U072: For copying originals
from the DP.
1-6-30
1-4-27
U067
U072
Test chart
#
Adjusting the original scan data (image
adjustment)
Adjusting the leading edge
margin (scanning adjust-
ment)
B MARGIN
B MARGIN
U403: For copying an original
placed on the contact glass.
U404: For copying originals
from the DP.
1-6-31
1-4-63
U403
U404
Test chart
%
Adjusting the original scan data (image
adjustment)
Adjusting the trailing edge
margin (scanning adjust-
ment)
D MARGIN
D MARGIN
U403: For copying an original
placed on the contact glass.
U404: For copying originals
from the DP.
1-6-31
1-4-63
U403
U404
Test chart
^
Adjusting the original scan data (image
adjustment)
LSU illumination start/end timingAdjusting the left and right
margins (printing adjust-
ment)
A
C
1-6-13U402 U402 test
pattern
9
Adjusting the position of the ISU (scann-
ing adjustment)
Adjusting the lateral square-
ness (scanning adjustment)
–– 1-6-25–– Test chart
0