3-1-21
2A3/4
13. While pressing the image formation unit safety lock release plate, put the image
formation unit back into the machine.
Image formation unit
Image formation unit safety lock release plate
* Illustration shows a 42 ppm.
Figure 3-1-25
14. Return the paper transfer section release lever to the original position to secure
the paper conveying section.
1. While lifting the fixing unit release lever, pull the fixing unit out from the
machine.
Fixing unit
Fixing unit release lever
* Illustration shows a 42 ppm.
Figure 3-1-26 Pulling out the fixing unit
Adjust the fixing pressure.
To Next Page
Loading...
