Kyocera KM-4230

3-1-36
2A3/4
10. Route the dehumidifier relay cable using the five wire saddles.
11. Insert the 2-pin connector of the optical heater into the 2-pin connector of the
dehumidifier relay cable.
12. Insert the 2-pin connector of the main PCB into the 2-pin connector of the
dehumidifier relay cable.
13. Insert the 4-pin connector of the main PCB into the 4-pin connector of the
dehumidifier relay cable.
Wire saddle
1-pin connectors
Optical heater (cable)
2-pin connector
2-pin connector
Dehumidifier relay cable
4-pin connector
4-pin connector
2-pin connector
2-pin connector
Main harness
Wire saddle
Wire saddle
Wire saddle
Wire saddle
Main harness
Figure 3-1-45