Kyocera KM-4230

3-1-37
2A3/4
14. Remove the two screws holding the lower left cover and then the cover.
15. Remove the cap in the lower left cover.
16. Refit the lower left cover using the two screws.
17. Insert the heater switch instead.
18. Plug the two 1-pin connectors of the dehumidifier relay cable onto the terminals of
the heater switch.
Heater switch
Heater switch
1-pin connector
Dehumidifier relay cable
1-pin connector
Cap
Lower left cover
Figure 3-1-46
19. Refit all removed parts.