3-2-60
2A3/4
Description
Maintenance
item No.
U203 Operating DF separately
Description
Simulates the original conveying operation separately in the SRDF.
Purpose
To check the SRDF.
Method
1 Press the print key. The screen for selecting an item is displayed.
2 Set the magnification to between 25 and 200% using the Up/Down
keys.
3 Place an original in the SRDF if running this simulation with paper.
4 Select the item to be operated. The selected item is displayed in
reverse and operation starts.
5 To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key when the operation stops. The screen for
selecting the maintenance item No. is displayed.
Display
ADF MODE
RADF MODE
ADF MODE (NON-PAPER)
RADF MODE (NON-PAPER)
Operation
With paper, single-sided original
With paper, double-sided original
Without paper, single-sided original
(continuous operation)
Without paper, double-sided original
(continuous operation)
To Next Page
Loading...
