3-2-61
2A3/4
Maintenance
item No.
Description
U204 Setting the presence or absence of a key card or key counter
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
A key card is not available for metric specifications. The setting for the
HECON key card, which is supported by inch-specification machines, is not
necessary in this maintenance item.
Method
Press the start key.
Setting
1 Select the optional counter to be installed. The selected counter is
displayed in reverse.
Pressing the reversed item again resets the selection.
2 Press the print key. The screen for selecting a maintenance item No. is
displayed.
Completion
To exit this maintenance item without changing the current setting, press
the stop/clear key. The screen for selecting a maintenance item No. is
displayed.
Display
KEY CARD
KEY COUNTER
Description
The key card is installed.
The key counter is installed.
To Next Page
Loading...
