3-2-93
2A3/4
Maintenance
item No.
Description
U905 Checking/clearing counts by optional devices
Description
Displays or clears the counts by optional devices.
Purpose
To check the use of the SRDF, finisher and booklet siticher. Also to clear
the counts after replacing consumable parts.
Method
1 Press the print key. The screen for selecting an item is displayed.
2 Select the device, the count of which is to be checked. The count of the
selected device is displayed.
• SRDF (DF)
• Finisher (SORTER)
Clearing
1 Select the item to be cleared. The selected item is displayed in reverse.
2 Press the print key. The count is cleared.
3 To return to the screen for entering an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for
selecting a maintenance item is displayed.
Display
CHANGE
ADF
RADF
Description
Original replacement count
No. of single-sided originals that
has passed through the DF in ADF mode
No. of double-side originals that
has passed through the DF in RADF mode
Display
COPY COUNT
STAPLE
PUNCH
STACKER
SADDLE
Description
No. of copies that has passed
Frequency the stapler has been activated
Frequency the punch has been activated
Frequency the stacker has been activated
Frequency the booklet stitcher has been activated
To Next Page
Loading...
