3-2-94
2A3/4
Description
Maintenance
item No.
U906 Resetting partial operation control
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the
drawers or other sections below, and the related parts are serviced.
The following sections can be the subject of the partial operation:
SRDF
Large paper deck
Copier upper drawer
Copier lower drawer
Paper feed desk upper drawer
Paper feed desk lower drawer
Duplex unit
Finisher
Method
1 Press the print key.
2 Press RESET on the touch panel.
3 Press the print key to reset partial operation control. The maintenance
mode is exited, and the machine returns to the same status when the
main switch is turned on.
To Next Page
Loading...
