2A3/4
3-3-90
• Detaching DF forwarding pulleys
5. Remove the stop ring and bushing. While lifting the forwarding shaft, remove the
DF forwarding pulleys.
6. Clean or replace the DF original feed pulley and DF forwarding pulleys.
7. Refit all removed parts.
∗ When fitting the DF original feed pulley and DF forwarding pulleys, ensure that the
side having the one-way clutch faces the machine rear.
DF forwarding pulleys
DF forwarding belt
DF original feed pulley 28
Forwarding shaft
Stop ring
Bushing
One-way clutch
Figure 3-3-107 Detaching the DF forwarding pulleys
To Next Page
Loading...
