Kyocera KM-8030 - Page 165

2FB/2FC
1-5-6
Paper con-
veying sec-
tion
34 Misfeed in registration/
transfer section (cassette/
MP tray/optional side
feeder)
Registration switch (RSW) does not turn on within specified
time <459 ms (336 ms) for 80 cpm/590 ms (336 ms) for 60
cpm> of feed switch 1 (FSW1) turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8
1/2" size.
Registration switch (RSW) does not turn off within specified
time (459 ms for 80 cpm/590 ms for 60 cpm) of feed switch 1
(FSW1) turning off.
35 Misfeed in registration/
transfer section (duplex
section)
Registration switch (RSW) does not turn on within specified
time <459 ms (336 ms) for 80 cpm/590 ms (336 ms) for 60
cpm> of feed switch 1 (FSW1) turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8
1/2" size.
Registration switch (RSW) does not turn off within specified
time (459 ms for 80 cpm/590 ms for 60 cpm) of feed switch 1
(FSW1) turning off.
Fuser sec-
tion
40 Misfeed in fuser section 1 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from cassette 1).
41 Misfeed in fuser section 2 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from cassette 2).
42 Misfeed in fuser section 3 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from cassette 3).
43 Misfeed in fuser section 4 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from cassette 4).
44 Misfeed in fuser section 5 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from optional side feeder).
45 Misfeed in fuser section 6 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from MP tray).
* Description in ( ) is written for the specified time of less then
A4/11" x 8
1/2" size.
46 Misfeed in fuser section 7 Exit switch (ESW) does not turn on within specified time (1350
ms for 80 cpm/1736 ms for 60 cpm) of its turning on (when
paper is fed from duplex section).
Eject sen-
sor
50 Misfeed in eject section Exit switch (ESW) does not turn off within specified time <2000
ms (1000 ms) for 80 cpm/2573 ms (1286 ms) for 60 cpm> of
its turning on.
Duplex sec-
tion
60 Misfeed in duplex feed-
shift section
Feedshift switch (FSSW) does not turn on within specified time
(650 ms for 80 cpm/950 ms for 60 cpm) of exit switch (ESW)
turning on.
Feedshift switch (FSSW) does not turn off within 2000 ms of its
turning on.
62 Misfeed in duplex internal
tray
Duplex feed switch (DUPFSW) does not turn on within 450 ms
of the duplex switchback motor (DUPSBM) turning on.
Duplex feed switch (DUPFSW) does not turn off within
specified time <2000 ms (1000 ms) for 80 cpm/3000 ms (1500
ms) for 60 cpm> of its turning on.
* Description in ( ) is written for the specified time of less then
A4/11" x 8
1/2" size.
Section Jam code Description Conditions