2FB/2FC-2.0
1-6-10
(2) Detaching and refitting the paper feed pulley, forwarding pulley and separation pulley of cassette 3 and 4
Follow the procedure below to clean or replace the paper feed pulley, forwarding pulley or separation pulley of cassette 3
and 4.
Explanation of an detaching and refitting procedure is given only a cassette 3 since cassettes 3 and 4 are the same feed
units.
Procedure
1. Pull out cassette 1, 3 and 4.
2. Remove the screw and then remove the
front lower right cover.
Figure 1-6-18
3. While pushing the hook of primary paper
feed unit, pull out the unit forward.
4. Remove the primary paper feed unit from
the machine.
Figure 1-6-19
Front lower
right cover
Primary paper feed unit
Hook
To Next Page
Loading...
