Kyocera KM-8030

2FB/2FC-3
1-4-6
Other U901 Checking/clearing total copy counts by paper feed location 0
*1, *2
U903 Checking/clearing the paper jam count 0
*1, *2
U904 Checking/clearing the call for service counts 0
*1, *2
U905 Checking/clearing count by optional devices -
U906 Resetting partial operational control 0
*1, *2
U907 Checking/clearing the count value on each ejection location 0
*1, *2
U908 Checking the total counter value 0
*1
U909 Checking/clearing the fuser web count 0
*1, *2
U910 Clearing the black ratio data 0
*1, *2
U911 Checking/clearing the paper feed counts by paper size 0
*1, *2
U920 Checking the copy counts -
U921 Checking/clearing the waste toner box count 0
*1, *2
U922 Checking/clearing the solenoid count value 0
*1, *2
U925 Checking/clearing the system error counts 0
*1, *2
U927 Clearing the all copy counts and machine life counts -
U928 Checking machine life counts -
U935 Relay board maintenance MODE 0
*1
U954 Setting the type of cooling fan MODE2
MODE1
U965 Setting the cassette disconnection OFF
*1
U984 Checking the developing unit number -
U985 Displaying the developing unit history -
U986 Checking the cleaning unit number -
U987 Displaying the cleaning unit history -
U989 HDD Scandisk -
U990 Checking/clearing the time for the exposure lamp to light
Exposure lamp
CIS
0
*1, *2
-
U991 Checking the scanner operation count -
Section Item
No.
Content of maintenance item Initial setting*
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021