Kyocera KM-8030

2FB/2FC-3
1-4-5
Operation
panel/
Optional units
U248 Changing the paper ejection device settings
Adjustment of registration stop timing in punch mode
Adjustment of the paper stop timing in punch mode
Punch-hole scrap count
Setting the booklet stapling position
Setting the center folding position
Punch limit
0
*1
0
*1
0
*1, *2
0/0/0
*1
0/0/0
*1
100000
*1, *2
Mode setting U250 Setting the maintenance cycle 500000
*1, *2
U251 Checking/clearing the maintenance count 0
*1, *2
U252 Setting the destination INCH
*1
U253 Switching between double and single counts Double count
*1, *2
U254 Turning the auto start function ON/OFF ON
*1, *2
U258 Switching copy operation at toner empty detection Single copying/200
*1, *2
U260 Selecting the timing for copy counting Eject
*1, *2
U263 Setting the paper ejection when copying from the DP FACE-DOWN
*1, *2
U264 Setting the display order of the date Month/Day/Year (inch)
*1, *2
Day/Month/Year (metric)
*1, *2
U265 Setting OEM purchaser code 0
*1
U266 Setting the number of days after which to automatically
delete documents
0
*1, *2
U277 Setting auto application change time 30 s
*1, *2
U281 Setting stamp mode ON/OFF OFF
*1
U326 Setting the black line cleaning indication ON
*1
U327 Setting the drawer heater ON/OFF OFF/OFF
*1, *2
U330 Setting the number of sheets to enter stacking mode during
sort operation 201
*1, *2
U331 Switching the paper ejection mode Face-up ejection
*1, *2
U332 Setting the size conversion factor 1.0/1.0
*1, *2
U335 Setting the drum heater mode ON1
*1, *2
U339 Setting the drum heater ON/OFF OFF
*1
U341 Specific paper feed location setting for printing function OFF
*1, *2
U342 Setting the ejection restriction ON
*1, *2
U343 Switching between duplex/simplex copy mode OFF
*1, *2
U344 Setting the low-power mode Energy star (120 V)
*1, *2
GEEA (220-240 V)
*1, *2
U345 Setting the value for maintenance due indication -
Image
processing
U402 Adjusting the margins for the image printing 3.0/3.2/3.2/5.0/5.0
*1
U403 Adjusting the margins for scanning an original on the contact
glass
3.0/3.0/3.0/3.5
*1
U404 Adjusting the margins for scanning an original from the DP 3.0/2.5/3.0/4.0/
3.0/2.5/3.0/4.0
*1
U407 Adjusting the leading edge registration for memory image
printing
2.0
*1
U467 Adjusting the laser output 200 (80 cpm)/
150 (60 cpm)
*1
U472 Adjusting the laser output position 0
*1
Network
scanner
U504 Initializing the scanner NIC -
U505 Setting data base assistant ON
*1
U506 Setting the time out 10
*1
U508 Setting the LDAP OFF
*1, *2
U510 Setting the enterprise mode OFF
*1, *2
U511 Setting scan To FTP OFF
*1, *2
Section Item
No.
Content of maintenance item Initial setting*
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021