Kyocera KM-8030

2FB/2FC-3
1-4-9
U005
Copying without paper
Description
Simulates the copy operation without paper feed.
Purpose
To check the overall operation of the machine.
Remarks
Execute this maintenance mode after pull out all four cassettes.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be operated. The selected item is displayed in reverse.
3. Press the interrupt key. The copy mode screen is displayed.
4. Set the operation conditions required on the copy mode screen. Changes in the following settings can
be made.
Paper feed locations
Magnifications
Simplex or duplex copy mode
Number of copies: in simplex copy mode, continuous copying is performed when set to 999.
Copy density
Keys on the operation panel other than the energy saver (preheat) key
5. Press the start key. The operation starts.
Copy operation is simulated without paper under the set conditions. When operation is complete, the
screen for selecting an item is displayed.
6. To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
U018
Displaying the ROM checksum
Description
Displays the checksum of ROM.
Purpose
To check the checksum.
Method
Press the start key. The ROM checksum is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
PPC Only the copier operates.
PPC + DP Both the copier and DP operate (continuous operation).
Display Description
MAIN Main PWB ROM checksum
ENGINE Engine PWB ROM checksum
SCANNER Scanner PWB ROM checksum
LANGUAGE(Stand.) Standard language ROM checksum
LANGUAGE(Option) Optional language ROM checksum
DP DP main PWB ROM checksum
FINISHER Document finisher* ROM checksum
*Optional.