6-48
Using Various Functions > Functions
Item Value Description
Off
Border Erase
Sheet
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00" to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
*1 The input units can be changed in System Menu.
Measurement
(page 8-15)
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Border Erase
Book
Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00" to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
Gutter
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Individual
Border Erase
Top Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
Bottom
Left
Right
Original
Orientation
Top Edge on Top, Top Edge on
Left, Auto
*2
*2 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Back Page Same as Front Page, Do Not
Erase
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
To Next Page
Loading...
