Kyocera TASKalfa 6052ci - Page 335

6-54
Using Various Functions > Functions
When placing the original on the platen, consecutively replace each original and press the [Start] key.
After scanning all originals, select [Finish Scan] to start copying.
Printing
Print a document to 1-sided or 2-sided sheets.
2-sided >>
1-sided
Original Binding Left/Right, Binding Top Select the binding orientation of originals.
Original
Orientation
Top Edge on Top, Top Edge on
Left, Auto
*1
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
2-sided >>
2-sided
Original Binding Left/Right, Binding Top Select the binding direction of originals.
Finishing Binding Left/Right, Binding Top Select the binding orientation of copies.
Original
Orientation
Top Edge on Top, Top Edge on
Left, Auto
*1
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Book >>
1-sided
*2
Original Binding Left, Binding Right Select the binding direction of originals.
Book >>
2-sided
*2
Original Binding Left, Binding Right Select the binding direction of originals.
Finishing Book>>2-sided, Book>>Book Select the desired Duplex option.
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
*2 [Top Edge on Top] is set for "Original Orientation".
Item Value Description
1-sided
―
Disables the function.
2-sided Left/Right Prints a 2-sided document so that the sheets are aligned properly for binding on the
left or right.
Top Prints a 2-sided document so that the sheets are aligned properly for binding on the
top.
Item Value Description