6-65
Using Various Functions > Functions
Sending/Storing
This cannot be set when Text Stamp is set in the system settings.
Sending Jobs (page 8-25)
Storing Jobs (page 8-27)
Item Value Description
Off
On Stamp Keyboard, Template 1 to 8 Select [Keyboard] and enter the text string to
be printed, or select a text stamp from the
displayed templates.
Templates that have been set will appear.
For details on registering templates, refer to
the following:
Text (Text Stamp) (page 8-22)
Position Top Left, Top Middle, Top
Right, Middle Left, Center,
Middle Right, Bottom Left,
Bottom Middle, Bottom Right,
Detail
Set the stamp position to be printed.
Select [
Position
] and select the text stamp
position.
Select [Detail] to set the stamp position using
numeric values, and to set the stamp angle.
Font Size Registered font sizes are
displayed. For details on
registering font sizes, refer to
the following:
Font (Text Stamp) (page 8-
22)
Set the font size of text stamp.
Character
Border
Off, Circle, Rectangle,
Underline
Set the character border and underline.
Style None, Bold, Italic, Bold/Italic Set the font style of text stamp. Select a font
style by checking the checkbox.
Font Courier, Letter Gothic Set the font of text stamp.
Color Black, Red, Green, Blue,
Cyan, Magenta, Yellow, White
Set the color of text stamp.
Density 10 to 100%
(in 10% increments)
Set the density of text stamp color.
Set the value by selecting [+] or [-].
Display
Pattern
Transparent, Clipping,
Overwrite
Set the display method of text stamp.
Original Orientation Top Edge on Top,
Top Edge on Left, Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document
top edge to scan correct direction. Select
[Original Orientation] to choose orientation
of the originals, either [Top Edge on Top] or
[Top Edge on Left]. Then select [OK].
To Next Page
Loading...
