8-13
Setup and Registration (System Menu) > System Menu
Auto Detect Original Size Select whether to automatically detect originals of special or non-standard size.
Select [Metric] when automatically detecting the originals in centimeter sizes. Select
[Inch] when detecting the originals in inch sizes.
Metric A6/Hagaki As A6 and Hagaki (Cardstock) are similar in size, select either one of them for
automatic detection.
Value: A6, Hagaki
If [Hagaki] is set, only the originals placed on the platen are detected.
Folio Select whether to enable automatic detection of Folio.
Value: Off, On
11×15" Select whether to enable automatic detection of 11×15" size.
Value: Off, On
Inch Legal/
Oficio II/
216×340 mm
Set the original sizes for the device to detect automatically.
Value: Legal, Oficio II, 216×340 mm
Media for Auto (Color)
Media for Auto (B&W)
Select a default media type for auto paper selection when [Auto] is selected of Paper
Selection. If [Plain] is selected, the paper source with plain paper loaded in the
specific size is selected. Select [All Media Types] for the paper source with any kind
of paper loaded in the specific size.
Value: All Media Types, Plain, Transparency, Rough, Vellum, Labels, Recycled,
Preprinted, Bond, Cardstock, Color, Prepunched, Letterhead, Envelope, Thick,
Coated, High Quality, Index Tab Dividers, Custom 1 to 8
Paper Source for Cover Select the paper source in which the cover paper used for the Cover function is
placed.
Value: Cassette 1 (to 5), Multi Purpose Tray
[Cassette 3] to [Cassette 5] are displayed when the following optional paper feeder
is installed.
[Cassette 3]: When a paper feeder (500-sheet×2) or large capacity paper feeder
(1,500-sheet×2) is installed.
[Cassette 4]: When a paper feeder (500-sheet×2) or large capacity paper feeder
(1,500-sheet×2) is installed.
[Cassette 5]: When a side feeder (3,000-sheet) is installed.
Item Description
To Next Page
Loading...
