Kyocera TASKalfa 6052ci - Page 425

8-45
Setup and Registration (System Menu) > System Menu
Sending Log History
[System Menu/Counter] key > [Report] > [Sending Log History]
Login History Settings
[System Menu/Counter] key > [Report] > [Login History Settings]
Item Description
Auto Sending This function automatically sends the log history to the specified destinations
whenever a set number of jobs has been logged.
Value: Off, On
NOTE
If [On] is selected, specify the number of job histories. The setting range is 1 to 1,500.
Send Log History You can also send the log history to the specified destinations manually.
Destination Set the destination to which log histories are sent. Only E-mail address can be set.
Job Log Subject Set the subject automatically entered when sending log histories by E-mail.
Value: Up to 60 characters
SSFC Log Subject Enter the subject of the printed job history with IC card authentication.
Value: Up to 60 characters
Personal Information Select whether to include personal information in the job log.
Value: Include, Exclude
Item Description
Login History Select whether to record the Login History.
Value: Off, On
NOTE
If [On] is selected, set the number of histories to be recorded. The setting range is 1
to 1,000.
Auto Sending Select whether the login history is automatically sent to the set address when the
number of entries reaches the number set in "Login History".
Value: Off, On
NOTE
This function is displayed when "Login History" is set to [On].
Destination Set the destination to which login histories are sent. E-mail address only can be set as
destination.
NOTE
This function is displayed when "Login History" is set to [On].
Subject Set the subject automatically entered when sending login histories by E-mail.
Value: Up to 60 characters
NOTE
This function is displayed when "Login History" is set to [On].
Log Reset Resets the recorded login histories.