Kyocera TASKalfa 6052ci - Page 426

8-46
Setup and Registration (System Menu) > System Menu
Device Log History Settings
[System Menu/Counter] key > [Report] > [Device Log History Settings]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Item Description
Device Log History Select whether to record the device log history.
Value: Off, On
NOTE
If [On] is selected, set the number of histories to be stored. The setting range is 1 to
1,000.
Auto Sending Select whether the device log history is automatically sent to the set address when
the number of entries reaches the number set in "Device Log History".
Value: Off, On
NOTE
This function is displayed when "Device Log History" is set to [On].
Destination Set the destination to which device log histories are sent. E-mail address only can be
set as destination.
NOTE
This function is displayed when "Device Log History" is set to [On].
Subject Set the subject automatically entered when sending device log histories by E-mail.
Value: Up to 60 characters
NOTE
This function is displayed when "Device Log History" is set to [On].
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000