Kyocera TASKalfa 6052ci - Page 427

8-47
Setup and Registration (System Menu) > System Menu
Secure Comm. Error Log
[System Menu/Counter] key > [Report] > [Secure Comm. Error Log]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Item Description
Secure Comm. Error Log Select whether to record the secure communication error log history.
Value: Off, On
NOTE
If [On] is selected, set the number of histories to be stored. The setting range is 1 to
1,000.
Auto Sending Select whether the secure communication error log history is automatically sent to the
set address when the number of entries reaches the number set in "Secure Comm.
Error Log".
Value: Off, On
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Destination Set the destination to which secure communication error log histories are sent. E-mail
address only can be set as destination.
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[
On ].
Subject Set the subject automatically entered when sending secure communication error log
histories by E-mail.
Value: Up to 60 characters
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000