2KN/2KP
1-3-75
U331
Switching the paper ejection mode
Description
Sets whether to eject copied sheets with the printed face facing up or down.
Purpose
To be set according to user request.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the ejection mode. The selected item is displayed in reverse.
Initial setting: FACE UP
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
U332
Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/11" x 8
1/2" size. The coefficient set here is used
to convert the black ratio in relation to the A4/11" x 8 1/2" size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/11" x 8
1/2" size
for copying and printing respectively.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select copying (COPY) or printing (PRT).
2. Change the setting using the cursor up/down keys.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item is
displayed.
Maintenance
item No.
Description
Display Description
FACE UP Face-up ejection
FACE DOWN Face-down ejection
Display Description Setting range Initial setting
COPY Size parameter for copying 0.1 to 3.0 1.0
PRT Size parameter for printing 0.1 to 3.0 1.0
To Next Page
Loading...
