2KN/2KP
1-3-82
U407
Adjusting the leading edge registration for memory image printing
Description
Adjusts the leading edge registration during memory copying.
Purpose
Make the following adjustment if there is a regular error between the leading edge of the copy image on the
front face and that on the reverse face during duplex switchback copying.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
Adjustment
1. Press the start key. The screen for selecting an item is displayed.
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the cursor up/down keys.
For copy example 1, decrease the value.
For copy example 2, increase the value.
Figure 1-3-19
5. Press the start key. The value is set.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
U402
(P.1-3-79)
U034
(P.1-3-15)
U066
(P.1-3-26)
U403
(P.1-3-80)
U071
(P.1-3-30)
U407
U404
(P.1-3-81)
Description
Setting
range
Initial
setting
Change in
value per step
Leading edge registration for memory image printing -2.0 to 2.0 2.0 0.1 mm
Image on
front face
Copy
example 1
(reverse face)
Copy
example 2
(reverse face)
To Next Page
Loading...
