Kyocera TASKalfa 620 - Page 140

2KN/2KP
1-3-102
Specifying the paper weight to the media type
Assigns one of the paper weights to the media type.
1. Select [Media Type (paper weight)] using the cursor
up/down keys and press [Change #].
2. Select the media type to specify the weight using
the cursor up/down keys and press [Change #].
3. Select the paper weight.
Extra Heavy/Heavy3/Heavy2/Heavy1/Normal3/
Normal2/Normal1/Light (Thin)
Extra Heavy - OHP sheet/Heavy3 - from 171 g/m
2
to 200 g/m
2
/Heavy2 - from 136 g/m
2
to 170 g/m
2
/
Heavy1 - from 106 g/m
2
to 135 g/m
2
/Normal3 - from
91 g/m
2
to 105 g/m
2
/Normal2 - from 76 g/m2 to 90
g/m
2
/Normal1 - from 60 g/m
2
to 75 g/m
2
/
Light (Thin) - from 45 g/m
2
to 64 g/m
2
4. Press [Close].
Allowing duplex copying to custom media type
Determines whether duplex copying is allowed to cus-
tom media type.
1. Select [Select media type(2sided)] using the cursor
up/down keys and press [Change #].
2. Select from [Custom 1] through [Custom 8] and
press [Change #].
3. Select [On] or [Off].
4. Press [Close].
Making copying on letterhead paper easy
Copying the original onto letterhead paper requires that
the orientation of the original and the target paper
match with each other. By switching [Adj(usting). Print
Direction] on, the copier correctly prints the original
onto the letterhead paper when the original and the let-
terhead paper are aligned with each other in the same
orientation on the contact glass and in the cassette.
This function also applies to prepunched and pre-
printed paper.
1. Select [Special paper action mode] ([Specif. paper
action mode]) using the cursor up/down keys and
press [Change #].
2. Select [Adj. Print Direction] or [Speed Priority].
Auto detect originals
Predetermines what paper size is selected for printing
when copying an original document of non-standard
sizes.
This setting is only available for metric specifications.
1. Select [Org. Auto Detect Setting] using the cursor
up/down keys and press [Change #].
2. Select the paper size using the cursor up/down
keys and press [Change #].
When the size of the original document is cardstock
or A6R, select [Cardstock] or [A6].
When the size of the original document is B4R or
Folio, select [B4] or [Folio].
When the size of the original document is 11 x 15"
(computer form), select [On] or [Off].
3. Press [Close].
Orientation of original document
Sets the orientation of the original document on the
contact glass.
1. Select [Original Orientation] using the cursor up/
down keys and press [Change #].
2. Select [Top Edge Top] or [Top Edge Left].
Setting sleep timer timeout
Predetermines the period of time before the copier
enters sleep mode.
If the copier is used frequently, we recommend using a
longer timeout. If it is used infrequently, use a shorter
timeout.
1. Select [Sleep mode changing time] using the cursor
up/down keys and press [Change #].
2. Set the time using [+] or [-] key.
Setting range: 1 to 240 minutes
Setting Low-Power timer timeout
Sets the period of time before the copier enters Low-
Power mode.
1. Select [Low power mode chng. time] using the cur-
sor up/down keys and press [Change #].
2. Set the time using [+] or [-] key.
Setting range: 1 to 240 minutes
Setting auto clear timeout time
Sets the period after copying before the copier auto-
matically clears the previous settings.
1. Select [Auto Clear Time Setting] using the cursor
up/down keys and press [Change #].
2. Set the time using [+] or [-] key.
Setting range: 10 to 270 seconds
Selecting output destination
Sets the default destination for finished copies.
This setting is available when the copier is equipped
with the optional document finisher.
1. Select [Select Copy output mode] using the cursor
up/down keys and press [Change #].
2. Select the desired output destination.
Auto/Tray A/Tray 1/Tray 2/Tray 3/Tray 4/Tray 5
Activating operation panel sound
Activates the sound for confirmation when the opera-
tion panel keys are pressed.
1. Select [Key sound ON/OFF] using the cursor up/
down keys and press [Change #].
2. Select [Off] or [On].
Enabling silent mode
The silent mode lets the copier deactivate the ventilat-
ing fans for quieter operation.
1. Select [Silent Mode] using the cursor up/down keys
and press [Change #].
2. Select [Off] or [On].