2KN/2KP
1-5-32
7. Release the inserted part of the operation
unit upper cover and then remove the cover.
Figure 1-5-66
8. Remove each screw, and then remove the
slit holder plate and slit glass.
Figure 1-5-67
9. Remove each screw, and then remove the
front and rear wire holder plates from the
mirror 1 frame.
Figure 1-5-68
Inserted parts
Operation unit
upper cover
Slit holder
plate
Slit holder
plate
Slit glass
Mirror 1 frame
Rear wire holder plate
Front wire holder plate
To Next Page
Loading...
