2KN/2KP
1-5-69
10. Check or replace the fuser heater M, S and
L, and refit the heaters to the fuser unit.
The fuser heater mount can be attached
with ease if the fuser heater wires are lightly
twisted before attaching the fuser heater
mount again.
When connecting the receptacles again,
make sure that the wire color of each recep-
tacle coincides with the corresponding label
color (see step 6).
11. Refit the front fuser cover, upper fuser frame
and upper fuser cover to the fuser unit.
12. Refit the fuser unit.
Figure 1-5-142
Fuser heater mount
Fuser
heaters
Fuser heater wires
Fuser heaters
To Next Page
Loading...
