2KN/2KP
1-2-13
1. Load paper in the cassette.
* The deck front cursors are movable back
and forth within the width limits of the
ellipse holes for the fixing screws. Loosen
the screws, move the deck front cursors
appropriately, and tighten the screws if the
clearance between the paper and deck
front cursors is tight.
* When fixing the paper width guides posi-
tion of cassette 3 or 4, use cursor pins sup-
plied with the machine.
2. Make test copies.
Figure 1-2-17
Make test copies.
Screw
Hole
Deck front cursor
Deck
front cursor
Deck front cursor
Cursor pins
Cursor pins
Paper width guides
To Next Page
Loading...
