2KN/2KP
1-3-8
U003
Setting the service telephone number
Description
Sets the telephone number to be displayed when a service call code is detected.
Purpose
To set (during initial set-up of the machine) the telephone number for contacting service.
Method
Press the start key. The currently set telephone number is displayed.
Setting
1. Use the numeric keys to enter the telephone number (up to 15 digits).
* To enter symbols such as hyphens and parentheses, select as required from the symbols displayed on
the touch panel as shown below. To move the cursor, press Left or Right in the bottom row.
2. Press the start key. The telephone number is set, and the screen for selecting a maintenance item No. is
displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U004
Setting the machine number
Description
Sets or displays the machine number.
Purpose
To check or set the machine number.
Method
1. Press the start key. The currently machine number is displayed.
Setting
1. Press MACHINE No.
2. Press the start key. Writing of machine number starts.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
∗
(
-
Left
#
)
(Space)
Right
To Next Page
Loading...
