2WA/2NJ/2RK
6-6
Image
process-
ing
U404 Adjusting margins for scanning an
original from the document proces-
sor
Adjusts the margin for scanning originals
U407 Adjusting the writing timing (Duplex/
Reversal)
Adjusting the writing timing when duplex printing
U410 Adjusting the halftone automatically Acquiring the data for the automatic halftone
adjustment and the ID correction
U411 Scanner auto adjustment Adjusting the scanner and DP automatically
U412 Adjusting the uneven density Corrects the LSU density unevenness
U415 Adjusting the print position automati-
cally
Execute the automatic adjustment of the timing
relarion
U425 Set Target Inputs the Lab value printed on an adjustment
original
U460 Conveying sensor adjustment Correct the multi feed sensor threshold of the
side multi tray.
U464 ID correction setting Sets the ID correction
U465 ID correction data Displays the light intensity control value after the
ID correction
U470 Setting the JPEG compression rate Sets the JPEG compression rate
U485 Image process mode setting Sets the image processing
U520 TDRS setting Checking/setting the TDRS
FAX U600 Initialize: All Data Initializes all data and image memory.
U601 Initialize: Keep data Initializing the software switches of other than
the machine data
U603 User data 1 Makes user settings to enable the use as a FAX
U604 User data 2 Makes user settings to enable the use as a FAX
U605 Data clear Initializing the FAX communication data
U610 System 1 Set the number of lines to be ignored when
receiving a FAX at 100% magnification and in
the auto reduction mode.
U611 System 2 Number of adjustment lines for automatic reduc-
tion.
U612 System 3 Setting regarding the FAX communication oper-
ation
U615 System 6 Sets the recording paper size at FAX reception
and received image size
U620 FAX system Sets the signal detection method for remote
switching
U625 Communication settings Sets the auto redialing interval and the number
of times of auto redialing
U630 Communication control 1 Setting the FAX communication
U631 Communication control 2 Sets the FAX communication
Section No. Maintenance item Outline
To Next Page
Loading...
