Kzyee KM301 - 02 Monitor Test; Oxygen Sensor Data Viewing

OBD & Battery Analysis Scanner
- 38 -
02 Monitor Test
Mode $05 Request Oxygen Sensor Monitoring Test Results
(2007 and older vehicles only)
View the oxygen sensor test data on
pre-CAN vehicles.
For CAN vehicles, see On-Board
Monitor Test on page 39.
This section contains advanced
functions. Some data may need to be
interpreted by a qualified technician.
Note: Not all vehicles return the
same data, results may vary from
the examples given herein.
1. From Diagnostic Menu,use the Up/
Down button to select O2 Monitor
Test, then press OK.
2. Select a sensor, then press OK.
Figure 109
3. View data.
Figure 108
Figure 110
Note: If necessary, have a qualified
technician Interpret the data.
O2 Bank1 Sensor1 O2
Bank1 Sensor2
?
O2 Monitor Test 2/2
?
Lean-Rich Threshd V
Min for text Cyc (V)
Max for text Cyc (V)
1/4
O2 Bank1 Sensor2
Rich- Lean Threshd V
02 Monitor Test
On-Board Mon. Test
?
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
Diagnostic Menu 6/11