OBD & Battery Analysis Scanner
- 5 -
Battery Test
Notes：
1. This product is a testing tool for 12V battery vehicles. The working DC
voltage range of this product is 8 to 30 volts.
2. The battery voltage will be slightly higher than the normal value when it
is just fully charged. Please turn on the headlamp for 2-3 minutes, and
then measure it when the voltage drops back to the normal value.
3. Do not store or use this product in direct sunlight, or expose it to high
temperature and humidity, otherwise it may cause deformation or
damage.
4. Available battery standards:
1) Cold start rating (ampere) range:
Figure3
2) Voltage Test Range：8-30V DC
To Next Page
Loading...