L-Acoustics A15 Series User Manual

Rigging procedures
KS21 and A15 Wide/Focus array
About this task
Flying hybrid arrays
The KS21 subwoofers must always be on top of the array.
Refer to Soundvision for maximum congurations.
Procedure
1. Prepare a stack of KS21.
Connect each enclosure on both sides before adding the new one.
SHLAK!
2. Secure A15-BUMP or A15-RIGBAR on top of the array.
A15-BUMP A15-RIGBAR
Connect A15-BUMP to the top KS21 on both sides. Connect A15-RIGBAR to the top KS21 on both sides.
CLICK!
CLICK!
52 A15 owner's manual (EN) version 1.2

L-Acoustics A15 Series Specifications

General

Nominal impedance	8 ohms
Frequency Response	44 Hz - 20 kHz
Maximum SPL	141 dB
Amplification	LA4X / LA8 / LA12X
Weight	33 kg
LF Transducers	1 x 15'' neodymium
HF Transducers	1 x 3'' diaphragm compression driver
Power Handling	800 W
Connectors	2 x 4-point speakON