Label FEED NAVIGATOR User Manual

16. To view the Recipe Total Weight, press the Net/Total key and keep it pressed.
The [
TOTAL UNLOAD
] message and the programmed value will appear on the
display.
17. To program the Automatic Mixing Function, see chapter 4.4 - Automatic Mixing.
r Important: when using the Recipe Programming Activity it is also possible to:
• Press the Tare key to activate the No-Load Tare Function.
• Press the Menu key to select the Special Function Menu.
• Press the ID/Print key for 2 seconds to activate the Identification Code Function.
• Press the Prog./Start key to select the Recipe Execution Activity.
• Press the Man./Zero key to select the Manual Weighing Activity.
• Press the ? key to activate the Help Function.
• Use the Data Transfer Function through the T-Data8 Plug device or the Label
Wireless Linker card. r
user’s guide28

Label FEED NAVIGATOR Specifications

General

Brand	Label
Model	FEED NAVIGATOR
Category	Controller
Language	English