Lantronix XPort User Manual

Configuring the Unit
Packing Algorithm: Enable, Disable
Idle Time: Force transmit 12 ms, Force transmit 52 ms, Force Transmit 250 ms, Force
Transmit 5000 ms
Trailing Characters: None, One, Two
Send Immediate After Sendchars: Enable, Disable
Sendchar Define2-Byte Sequence: Enable, Disable
Send Character 01: (User Selectable)
Send Character 02: (User Selectable)
Disconnect Mode: Ignore DTR, With DTR Drop
Check for CTRL-D to Disconnect: Enable, Disable
Port Password: Enable, Disable
Telnet Mode: Enable, Disable
Inactivity Timeout: Enable, Disable
Inactivity Timer: (User Selectable)
Port Password: (User Selectable. Port Password must be enabled)
4.3.5 Factory Settings1
Click this button to set Channel1 to the factory default settings.
4.3.6 Update Settings
Click the Update Settings button to send all changed settings to the device.
4-6 XPort™ User Manual and Development Kit

Lantronix XPort Specifications

General

Data Link Protocol	Ethernet, Fast Ethernet
Connectivity Technology	Wired
Form Factor	Embedded
Category	Embedded Systems
Interface	Serial
Serial Ports	1
Operating Temperature	0°C to 70°C