6-34 System 824 Training Manual 2/19/98
Step 7 “Intv Period” is used to establish the duration
of each Interval sample. Press u or d to
highlight “Intv Period”.
Step 8 Press c (or r) to enter the “Intv Period”
screen.
The u and d arrow keys increment through the
Interval time values, while l and r toggles
between the different numeric fields (hh:mm:ss).
Step 9 Now enter our one minute interval choice by
selecting “00:01:00” After you have entered
this “Intv Period”, press c to enable this
selection.
To Next Page
Loading...
