Launch X-431 PRO - User Management; Connector Registration

LAUNCH X-431 PRO User’s Manual — Vehicle Diagnosis
30
Circle: To view and create a circle. Circle allows you to look for a rider
circle with common interest for technical exchange and experience sharing. Tap
a circle to view all history messages; tap
to view its detailed information. To
create a new circle, just tap
.
Mine: this option lets you to view your profile and make some preference
settings.
3.12 User Management
This function allows you to register connector, change password, set security
question and retrieve password etc.
3.12.1 Connector Registration
See Chapter 3.4.
3.12.2 Modify Personal Information
Tap “Modify Personal Information” to enter information modification screen. Fill
in each field, and then tap “Submit Information” to confirm; tap “Cancel” to abort.
3.12.3 Change Password
Tap “Change Password” to enter password modification screen.
Fill in each field, and then tap “Confirm” to confirm; tap “Cancel” to abort.
3.12.4 Setup Security Question
Tap “Setup Security Question” to enter setting interface. Follow the on-screen
instructions to fill in each field, and then tap “Confirm” to save your setting.
Note: Please record the question well so that you can use it to get back the
password.
3.12.5 Forget Password
Tap “Forget password” to enter. Input the correct user name and tap “Next Step”:
If you set the security question before
, the screen will enter the Answer the
security question interface. Key in your answer and tap “Confirm”, the system
will feedback your new password.