Launch X-431 User Manual

LAUNCH X-431 Module S2 User Manual
4
battery to supply power.
10 Power interface
Power the module through the battery
clamps cable.
1.3 Performance Parameters
Sensor module:
Parameter
Range
Number of channels
2
Precision
1%
Amplitude range
0~20V
Max output current
20mA
Predefined frequency range
0~20KHz
Square wave signal pulse
frequency
0~15KHz
Square wave signal duty cycle 0~100%
Power supply
Simulator sensor output/max current
20mA (output is powered by battery)
Drive solenoid, ignition coil/output
current 2A (external power supply)
USB
USB2.0 Type B (with charging and
power supply function/5V)
DC voltage simulation Support
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu

Launch X-431 Specifications

General

Operating System	Android
RAM	2GB
Processor	Quad-core
Storage	16GB
Battery	Rechargeable lithium-ion
Connectivity	Wi-Fi, Bluetooth
Diagnostic Functions	coding
Special Functions	Oil reset, EPB reset
Software Updates	Online updates
Supported Protocols	CAN
Languages	Multiple languages