acceleration and deceleration status.
8)
Titanium dioxide type oxygen sensor
Output channel: CH1
Output type: square wave
Drag the yellow slider to change the output frequency of CH1 to simulate the
acceleration and deceleration status.
3.2.2 AC Sensor
*Remarks: The following waveform is a sample waveform, not the actual output
waveform. Users can refer to it to change the parameter to achieve the function.
1)
Magneto-electric crankshaft position sensor
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
To Next Page
Loading...
