LeCroy WavePro 7100A

X-Stream Operator’s Manual
WM-OM-E Rev I 199
Local tpt Time between local feature peak
and trough.
Hysteresis argument
used to discriminate
levels from noise in
data.
Available with DDM2
option.
Standard in
DDA-5005A.
Local ttp Time between local feature trough
and the next local peak.
Hysteresis argument
used to discriminate
levels from noise in
data.
Available with DDM2
option.
Standard in
DDA-5005A.
Local tut Time a local feature spends under a
user specified percentage of its
peak-to-trough amplitude.
Hysteresis argument
used to discriminate
levels from noise in
data.
Available with DDM2
option.
Standard in
DDA-5005A.
Mathcad Produces a parameter using a
user-specified Mathcad function.
Available with XMAP
and XDEV option.
Standard in
DDA-5005A.
Mathcad 2001i or later
must be loaded on the
instrument.
MATLAB Produces a parameter using a
user-specified MATLAB function.
Available with XMAP
and XDEV option.
Standard in
DDA-5005A,
WaveRunner 6000A,
WaveMaster, WavePro
7000A, and sampling
scopes
MATLAB must be
loaded on the
instrument.